技术标签: usb Linux设备驱动 audio Android
一个UAC设备插入到Ubuntu 14.04电脑上dmesg中打印的信息如下:
[ 2367.490491] usb 3-3.2: new full-speed USB device number 9 using xhci_hcd
[ 2367.580010] usb 3-3.2: New USB device found, idVendor=0d8c, idProduct=0132
[ 2367.580018] usb 3-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2367.580023] usb 3-3.2: Product: USB PnP Audio Device
[ 2367.580027] usb 3-3.2: Manufacturer: C-Media Electronics Inc.
[ 2367.581679] input: C-Media Electronics Inc. USB PnP Audio Device as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.2/0003:0D8C:0132.0004/input/input18
[ 2367.581999] hid-generic 0003:0D8C:0132.0004: input,hidraw3: USB HID v1.11 Device [C-Media Electronics Inc. USB PnP Audio Device] on usb-0000:00:14.0-3.2/input2
[ 2367.913280] usbcore: registered new interface driver snd-usb-audio
这里可以看到其驱动程序为snd-usb-audio
,依据这个关键词在内核中查找到如下内容:
tony@tony-E431:~/linux-3.4.y$ grep "registered new interface driver" ./ -rn
Binary file ./vmlinux.o matches
Binary file ./.tmp_vmlinux1 matches
Binary file ./.tmp_vmlinux2 matches
Binary file ./drivers/built-in.o matches
Binary file ./drivers/usb/built-in.o matches
Binary file ./drivers/usb/core/built-in.o matches
./drivers/usb/core/driver.c:865: pr_info("%s: registered new interface driver %s\n",
Binary file ./drivers/usb/core/driver.o matches
Binary file ./drivers/usb/core/usbcore.o matches
Binary file ./arch/arm/boot/Image matches
Binary file ./vmlinux matches
tony@tony-E431:~/linux-3.4.y$
以及
// file: linux-3.4.y/sound/usb/card.c
/*
* entry point for linux usb interface
*/
static struct usb_driver usb_audio_driver = {
.name = "snd-usb-audio",
.probe = usb_audio_probe,
.disconnect = usb_audio_disconnect,
.suspend = usb_audio_suspend,
.resume = usb_audio_resume,
.id_table = usb_audio_ids,
.supports_autosuspend = 1,
};
根据probe方法snd_usb_audio_probe
调用了snd_usb_apply_boot_quirk
和snd_card_register
,查到了
// linux-3.4.y/sound/usb/card.c
/*
* new 2.5 USB kernel API
*/
static int usb_audio_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct snd_usb_audio *chip;
chip = snd_usb_audio_probe(interface_to_usbdev(intf), intf, id);
if (chip) {
usb_set_intfdata(intf, chip);
return 0;
} else
return -EIO;
}
// linux-3.4.y/sound/usb/quirks.c
int snd_usb_apply_boot_quirk(struct usb_device *dev,
struct usb_interface *intf,
const struct snd_usb_audio_quirk *quirk)
{
u32 id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
switch (id) {
case USB_ID(0x041e, 0x3000):
/* SB Extigy needs special boot-up sequence */
/* if more models come, this will go to the quirk list. */
return snd_usb_extigy_boot_quirk(dev, intf);
case USB_ID(0x041e, 0x3020):
/* SB Audigy 2 NX needs its own boot-up magic, too */
return snd_usb_audigy2nx_boot_quirk(dev);
case USB_ID(0x10f5, 0x0200):
/* C-Media CM106 / Turtle Beach Audio Advantage Roadie */
return snd_usb_cm106_boot_quirk(dev);
case USB_ID(0x0d8c, 0x0102):
/* C-Media CM6206 / CM106-Like Sound Device */
case USB_ID(0x0ccd, 0x00b1): /* Terratec Aureon 7.1 USB */
return snd_usb_cm6206_boot_quirk(dev);
case USB_ID(0x133e, 0x0815):
/* Access Music VirusTI Desktop */
return snd_usb_accessmusic_boot_quirk(dev);
case USB_ID(0x17cc, 0x1000): /* Komplete Audio 6 */
case USB_ID(0x17cc, 0x1010): /* Traktor Audio 6 */
case USB_ID(0x17cc, 0x1020): /* Traktor Audio 10 */
return snd_usb_nativeinstruments_boot_quirk(dev);
case USB_ID(0x0763, 0x2012): /* M-Audio Fast Track Pro USB */
return snd_usb_fasttrackpro_boot_quirk(dev);
}
return 0;
}
/*
* probe the active usb device
*
* note that this can be called multiple times per a device, when it
* includes multiple audio control interfaces.
*
* thus we check the usb device pointer and creates the card instance
* only at the first time. the successive calls of this function will
* append the pcm interface to the corresponding card.
*/
static struct snd_usb_audio *
snd_usb_audio_probe(struct usb_device *dev,
struct usb_interface *intf,
const struct usb_device_id *usb_id)
{
const struct snd_usb_audio_quirk *quirk = (const struct snd_usb_audio_quirk *)usb_id->driver_info;
int i, err;
struct snd_usb_audio *chip;
struct usb_host_interface *alts;
int ifnum;
u32 id;
alts = &intf->altsetting[0];
ifnum = get_iface_desc(alts)->bInterfaceNumber;
id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
if (quirk && quirk->ifnum >= 0 && ifnum != quirk->ifnum)
goto __err_val;
if (snd_usb_apply_boot_quirk(dev, intf, quirk) < 0)
goto __err_val;
/*
* found a config. now register to ALSA
*/
/* check whether it's already registered */
chip = NULL;
mutex_lock(®ister_mutex);
for (i = 0; i < SNDRV_CARDS; i++) {
if (usb_chip[i] && usb_chip[i]->dev == dev) {
if (usb_chip[i]->shutdown) {
snd_printk(KERN_ERR "USB device is in the shutdown state, cannot create a card instance\n");
goto __error;
}
chip = usb_chip[i];
chip->probing = 1;
break;
}
}
if (! chip) {
/* it's a fresh one.
* now look for an empty slot and create a new card instance
*/
for (i = 0; i < SNDRV_CARDS; i++)
if (enable[i] && ! usb_chip[i] &&
(vid[i] == -1 || vid[i] == USB_ID_VENDOR(id)) &&
(pid[i] == -1 || pid[i] == USB_ID_PRODUCT(id))) {
if (snd_usb_audio_create(dev, i, quirk, &chip) < 0) {
goto __error;
}
snd_card_set_dev(chip->card, &intf->dev);
chip->pm_intf = intf;
break;
}
if (!chip) {
printk(KERN_ERR "no available usb audio device\n");
goto __error;
}
}
/*
* For devices with more than one control interface, we assume the
* first contains the audio controls. We might need a more specific
* check here in the future.
*/
if (!chip->ctrl_intf)
chip->ctrl_intf = alts;
chip->txfr_quirk = 0;
err = 1; /* continue */
if (quirk && quirk->ifnum != QUIRK_NO_INTERFACE) {
/* need some special handlings */
if ((err = snd_usb_create_quirk(chip, intf, &usb_audio_driver, quirk)) < 0)
goto __error;
}
if (err > 0) {
/* create normal USB audio interfaces */
if (snd_usb_create_streams(chip, ifnum) < 0 ||
snd_usb_create_mixer(chip, ifnum, ignore_ctl_error) < 0) {
goto __error;
}
}
/* we are allowed to call snd_card_register() many times */
if (snd_card_register(chip->card) < 0) {
goto __error;
}
usb_chip[chip->index] = chip;
chip->num_interfaces++;
chip->probing = 0;
mutex_unlock(®ister_mutex);
return chip;
__error:
if (chip) {
if (!chip->num_interfaces)
snd_card_free(chip->card);
chip->probing = 0;
}
mutex_unlock(®ister_mutex);
__err_val:
return NULL;
}
probe依次调用了:
snd_usb_apply_boot_quirk
snd_usb_audio_create
snd_usb_create_quirk
snd_usb_create_streams
snd_usb_create_stream
snd_usb_parse_audio_interface 这里根据usb的信息解析成pcm参数(如声道数量,采样率等等)
snd_usb_create_mixer
snd_card_register
// linux-3.4.y/sound/core/init.c
snd_card_register调用了init_info_for_card以及snd_device_register_all。
<6>[ 58.704000] usb 1-1.1: new full-speed USB device number 5 using nxp-ehci
<6>[ 58.804000] usb 1-1.1: New USB device found, idVendor=0d8c, idProduct=0132
<6>[ 58.812000] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[ 58.820000] usb 1-1.1: Product: USB PnP Audio Device
<6>[ 58.824000] usb 1-1.1: Manufacturer: C-Media Electronics Inc.
<6>[ 58.832000] ALSA sound/usb/stream.c:438 5:1:1: add audio endpoint 0x82
<6>[ 58.840000] ALSA sound/usb/stream.c:438 5:1:2: add audio endpoint 0x82
<6>[ 58.848000] ALSA sound/usb/mixer.c:1214 [10] FU [Mic Capture Switch] ch = 1, val = 0/1/1
<3>[ 58.856000] ALSA sound/usb/mixer.c:868 10:0: cannot get min/max values for control 2 (id 10)
<6>[ 58.864000] ALSA sound/usb/mixer.c:1214 [10] FU [Mic Capture Volume] ch = 2, val = 0/1/1
<3>[ 58.876000] ALSA sound/usb/mixer.c:868 10:0: cannot get min/max values for control 2 (id 10)
<6>[ 58.884000] input: C-Media Electronics Inc. USB PnP Audio Device as /devices/platform/nxp-ehci/usb1/1-1/1-1.1/1-1.1:1.2/input/input6
<6>[ 58.896000] generic-usb 0003:0D8C:0132.0003: input,hidraw0: USB HID v1.11 Device [C-Media Electronics Inc. USB PnP Audio Device] on usb-nxp-ehci-1.1/input2
Bus 003 Device 019: ID 0d8c:0132 C-Media Electronics, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x0d8c C-Media Electronics, Inc.
idProduct 0x0132
bcdDevice 1.00
iManufacturer 1 C-Media Electronics Inc.
iProduct 2 USB PnP Audio Device
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 221
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 47
bInCollection 1
baInterfaceNr( 0) 1
AudioControl Interface Descriptor:
bLength 12
bDescriptorType 36
bDescriptorSubtype 2 (INPUT_TERMINAL)
bTerminalID 2
wTerminalType 0x0201 Microphone
bAssocTerminal 0
bNrChannels 2
wChannelConfig 0x0003
Left Front (L)
Right Front (R)
iChannelNames 0
iTerminal 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (OUTPUT_TERMINAL)
bTerminalID 7
wTerminalType 0x0101 USB Streaming
bAssocTerminal 0
bSourceID 8
iTerminal 0
AudioControl Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 5 (SELECTOR_UNIT)
bUnitID 8
bNrInPins 1
baSource( 0) 10
iSelector 0
AudioControl Interface Descriptor:
bLength 10
bDescriptorType 36
bDescriptorSubtype 6 (FEATURE_UNIT)
bUnitID 10
bSourceID 2
bControlSize 1
bmaControls( 0) 0x01
Mute Control
bmaControls( 1) 0x02
Volume Control
bmaControls( 2) 0x02
Volume Control
iFeature 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 7
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 29
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 7 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 16000
tSamFreq[ 3] 22050
tSamFreq[ 4] 32000
tSamFreq[ 5] 44100
tSamFreq[ 6] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0064 1x 100 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 7
bDelay 1 frames
wFormatTag 1 PCM
AudioStreaming Interface Descriptor:
bLength 29
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 2
bSubframeSize 2
bBitResolution 16
bSamFreqType 7 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 16000
tSamFreq[ 3] 22050
tSamFreq[ 4] 32000
tSamFreq[ 5] 44100
tSamFreq[ 6] 48000
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x00c8 1x 200 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
AudioControl Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0 Undefined
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 26
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x87 EP 7 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
UAC设备的参数是通过USB描述符确定的。比如声道是bNrChannels,位深是bBitResolution,采样率是bSamFreqType。截取其中一段说明:
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 7 Discrete
tSamFreq[ 0] 8000
tSamFreq[ 1] 11025
tSamFreq[ 2] 16000
tSamFreq[ 3] 22050
tSamFreq[ 4] 32000
tSamFreq[ 5] 44100
tSamFreq[ 6] 48000
声道1,位深16,波特率8000~48000。
文章浏览阅读4.2k次。打开src目录下的AppDelegate.cpp文件,若无修改则在第45行处找到全局声明的Size变量,修改`designResolutionSize`中的大小即可。_cocos2dx设置窗口大小
文章浏览阅读1.6k次。测试代码:@PostMapping() public void test(@RequestBody Student student){ System.out.println(student.getLover().name()); }class Student{ private Lover lover; public Lover getLover() { return lover; } public void setLover_springboot get请求怎么接收前端传递的枚举数字
文章浏览阅读1.5w次,点赞24次,收藏120次。简单来说就是去量纲后的回归(因为你要比较不同变量之间的显著性的大小,那么带着量纲怎么比,所以先把量纲去掉,然后再比较)官话:为了更为精准的研究影响评价量的重要因素(去除量纲的影响),我们可考虑使用标准化回归系数。_stata两个虚拟变量的交互项
文章浏览阅读203次。有时候安装mysql后使用mysql命令时报错 Can't connect to MySQL server on localhost (10061),或者用net start mysql 时报服务名无效,一般是因为mysql服务没有启动。这时候可以用管理身份运行cmd.exe(注意必须是管理..._c:\program files\mysql\mysql server 5.6\bin>mysqld --install install/remove
文章浏览阅读6.2k次,点赞3次,收藏44次。亚信联创科技校园招聘B 卷考试时间60_分钟 _考试方式(闭)卷(本试卷满分 100 分,答案请写在答题卡上)请不要在问卷上答题或涂改,笔试结束后请务必交回试卷部分内容分值备注一、计算机基础40分C/C++语言基础40分技能部分二、二选一JAVA 语言基础40分三、数据库20分总分100 分第一部分——计算机基础一、选择题(每题 2 分,总分 40分)1.CPU 状态分为目态和管态两种..._亚信科技java实习笔试题
文章浏览阅读1.3k次。3年对一个程序员来说是非常重要的。像我自己本身就是做程序员的,目前的薪资待遇是13K左右,虽然在我所在的公司不是最高的,但在所在的这个城市的消费水平来说,除了日常的开支,包括房租、水电、伙食、人际交往等费用之外,还能留下一部分闲钱自己存起来。不同城市的薪资待遇是不一样的,这主要是由于当地的消费水平和经济发展水平不同,所以如果你想要更高的薪资待遇,就要考虑在一线城市或者经济发达的城市工作。一个有着丰富工作经验的程序员,他的技能水平、经验和能力都比没有经验的程序员更加出色,所以他们的薪资待遇也会更高一些。_三线城市学java
文章浏览阅读418次。标签PostgreSQL , 标签 , 推荐系统 , 实时圈人 , 数组 , gin , gist , 索引 , rum , tsvector , tsquery , 万亿 , user , tag , 淘宝背景我们仅用了PostgreSQL的两个小特性,却解决了业务困扰已久的大问题。推荐系统是广告营销平台的奶牛,其核心是精准、实时、..._实时圈人
文章浏览阅读430次。软件测试风险追踪表风险追踪表 项目名称: 填制人: 编号 风险描述 影响 风险等级 发生的可能性 应对策略 状态 责任人 备注 ..._软件测试风险管理表格
文章浏览阅读1.2k次。一、AAC音频格式种类有哪些AAC音频格式是一种由MPEG-4标准定义的有损音频压缩格式。AAC包含两种格式 ADIF(Audio Data Interchange Format音频数据交换格式)和ADTS(Audio Data transport Stream音频数据传输流)。ADIF特点:可以确定的找到音视频数据的开始,不需要进行在音视频数据流中间开始的解码,它的解码必须在明确的定义开始。应用场景:常用在磁盘文件中。ADTS特点:具有同步字的比特流,解码可以在这个流中任何位置开始。类似于mp_aac adts
文章浏览阅读213次。像要使用Resouce类,必须创建一个 Resouce 文件夹,然后把需要的资源放进去,才可以在代码中设置路径进行访问_unity基本概念
文章浏览阅读2.4k次。指定自定义 CI/CD 配置文件,顾名思义就是在项目中指定文件来代替默认的.gitlab-ci.yml文件的方式来运行流水线。以往我们在使用流水线的时候,都是默认将.gitlab-ci.yml文件存在在项目的跟路径下,但是我们也可以指定备用文件名路径,或者不想在每个项目中来维护这个yml文件,那么通过自定义 CI/CD 配置文件便可以实现。_gitlab配置cicd
文章浏览阅读1w次。出现这个表示如果设置了自动增长,字段类型应该设置为int整型。_sql 错误 [1063] [42000]: incorrect column specifier for column 'id' incorrec